Vigilancia Tecnológica

Cellulose/silica nanocomposites, synthesised through the sol–gel technique, have garnered significant attention for their unique properties and diverse applications. The distinctive characteristics of these nanocomposites are influenced by a range of factors, including the cellulose-to-silica ratio, precursor concentration, pH, catalysts, solvent selection, temperature, processing techniques, and agitation. These variables play a pivotal role in determining the nanocomposites’ structure, morphology, and mechanical properties, facilitating tailoring for specific applications. Studies by Raabe et al. and Barud et al. demonstrated well-deposited silica nanoparticles within the interstitial spaces of cellulosic fibres, achieved through TEOS precursor hydrolysis and the subsequent condensation of hydroxyl groups on the cellulose fibre surface. The introduction of TEOS established a robust affinity between the inorganic filler and the polymer matrix, emphasising the substantial impact of TEOS concentration on the size and morphology of silica nanoparticles in the final composites. The successful functionalisation of cellulose fibres with the TEOS precursor via the sol–gel method was reported, resulting in reduced water uptake and enhanced mechanical strength due to the strong chemical interaction between silica and cellulose. In research conducted by Feng et al., the silica/cellulose composite exhibited reduced weight loss compared to the pristine cellulose matrix, with the integration of silica leading to an elevated temperature of composite degradation. Additionally, Ahmad et al. investigated the effects of silica addition to cellulose acetate (CA) and polyethylene glycol membranes, noting an increase in Young’s modulus, tensile strength, and elongation at break with silica incorporation. However, concentrations exceeding 4% (w/v) resulted in significant phase separations, leading to a decline in mechanical properties.