Vigilancia Tecnológica

Bamboo scrimber is acknowledged for its eco-friendly potential as a structural material. Its properties are significantly affected by both its density and resin content, but the effect of resin content on the properties under high density is not yet known. In this study, the microstructure, water resistance, mechanical properties, and thermal stability of bamboo scrimbers with varying resin content at a density of 1.30 g/cm3 were investigated. The results unearthed that phenolic resin assisted in the densification of bamboo cells during hot pressing, and a higher resin content could effectively reduce the cracks in the scrimber. The inherent cellulose I structure remained unaffected, but an increase in resin content led to a noticeable decline in crystallinity. Additionally, an increase in resin content pronouncedly improved the water resistance and dimensional stability of bamboo scrimbers. The water absorption and thickness swelling were as low as 9.67% and 7.62%, respectively. The modulus of rupture (MOR) exhibited a marginal increase with the amount of resin, whereas the compressive strength and short-beam shearing strength first increased and then decreased. Their peak strengths were 327.87 MPa at a resin content of 15 wt.%, and 168.85 MPa and 25.96 MPa at 11 wt.%, respectively. However, phenolic resin accelerated the thermal decomposition of bamboo scrimbers, and more resin worsened the thermal stability. These research outcomes offer a dual advantage, providing both a theoretical foundation and concrete data that can inform the production and practical application of high-density bamboo scrimbers.