Highly Permeable Ultrafiltration Membranes Based on Polyphenylene Sulfone with Cardo Fragments
For the first time, copolymers of polyphenylene sulfone (PPSU) with cardo fragments of phenolphthalein (PP) were synthesized to develop highly permeable flat-sheet ultrafiltration membranes. By introducing cardo fragments into the polymer chain, we achieved a mechanical strength 1.3 times higher than the strength of commercial PPSU. It is shown that the introduction of the cardo monomer significantly increases the solubility of the polymer in aprotic solvents. The highest solubility is observed at the concentration of PP 50 mol.%. It is found that reduced viscosity of cardo polymer solutions leads to an increase in the coagulation rate. The permeance of asymmetric ultrafiltration membranes increases with PP concentration from 17.5 L/(m2·h·bar) (10 mol.% PP) to 85.2 L/(m2·h·bar) (90 mol.% PP). These data are in agreement with the results of a study of the coagulation rate of polymer solutions. Thus, for ultrafiltration membranes with 1.5–8 times higher permeance in comparison with PPSU due to the introduction of cardo fragments in the polymer chain, possessing high rejection of the model dye Blue Dextran (MW = 70,000 g/mol), more than 99.2%, as well as high strength characteristics, were achieved.