Vigilancia Tecnológica

Schematic diagram of polymer film fabrication process.AbstractIn the present work, we report the effect of low?temperature plasma treatment on thermal, mechanical, and biodegradable properties of polymer composite blown films prepared from carp fish scale powder (CFSP) and linear low?density polyethylene (LLDPE). The CFSP was melt compounded with LLDPE using a filament extruder to prepare 1, 2, and 3?wt.% of CFSP in LLDPE polymer composite filaments. These filaments were further pelletized and extruded into blown films. The blown films extruded with 1, 2, and 3?wt.% of CFSP in LLDPE were tested for thermal and mechanical properties. It was observed that the tensile strength decreased with the increased loading content of CFSP, and 1% CFSP/LLDPE exhibited the highest tensile strength. To study the effect of low?temperature plasma treatment, 1% CFSP/LLDP polymer composite with high tensile strength was plasma treated with O2 and SF6 gas before blow film extrusion. The 1% CFSP/LLDPE/SF6?extruded blown films showed increased thermal decomposition, crystallinity, tensile strength, and modulus. This may be due to the effect of crosslinking by the plasma treatment. The maximum thermal decomposition rate, crystallinity %, tensile strength, and modulus obtained for 1% CFSP/LLDPE/SF6 film were 500.02°C, 35.79, 6.32?MPa, and 0.023?GPa, respectively. Furthermore, the biodegradability study on CFSP/LLDPE films buried in natural soil for 90?days was analyzed using x?ray fluorescence. The study showed an increase in phosphorus and calcium mass percent in the soil. This is due to the decomposition of the hydroxyapatite present in the CFSP/LLDPE biocomposite.