Vigilancia Tecnológica

With the development of coal mining and the increase in excavation depth, the stress on roadway surrounding rock is also increasing. This creates conditions for crack development in the roadway, so it is urgent to develop rock repair materials with excellent performance. The ability of thin spray-on liner (TSL) to repair rock and concrete opens up the possibility of reusing abandoned roadways. The ability of TSL to support the surrounding rock is also important in preventing the generation of roadway waste. In this paper, styrene–acrylic emulsion (SAE), vinyl acetate–ethylene copolymer emulsion (VAE), and polyvinyl alcohol powder (PVA) were used to prepare three TSLs. Rock-like materials were configured using cement mortar according to similar principles. Three types of TSLs were tested for basic properties such as viscosity and mechanical strength, which provided data to support the explanation of the repair performance of TSLs. Three TSLs were used to repair pre-cracked rock-like specimens (PR). The number of brushing times and the angle of PR’s cracks were regarded as test variables. Changes in the mechanical strength of repaired PRs were tested by compressive and flexural tests. TSL repair performance was evaluated with the help of mechanical strength changes. Results show that polyvinyl alcohol powder modified cement-based thin spray-on liner is most suitable for repairing rock cracks; as the thickness of the brush slurry increases, its repair performance continues to improve. This paper can provide experience and a theoretical basis for the research of other rock repair materials, and it is also instructive for repairing shotcrete in the roadway.