Vigilancia Tecnológica

Obtaining cellulose from forest residues develops sustainable processes in the biotechnology industry, especially in producing biopolymers, which could replace or add petroleum-derived polymers. This research seeks to optimize the ideal conditions of the mixing process to maximize the efficiency in obtaining cellulose through a process consisting of two treatment media for pine sawdust, specifically evaluating the impact of three types of impellers (propeller, flat blades, and 45° inclined flat blades) at speeds of (150, 250 and 350 rpm). DIN 28131 was used for the design of stirred tanks. Simulations were carried out with a volume of 50 L. CFD and FSI simulations of the agitation behavior of forest biomass in a stirred tank reactor were performed. The ALE method was applied, and the models were solved using the LS-DYNA computer program. The results indicate that agitation with propellers and flat blades inclined at 150 and 250 rpm was the most efficient, minimizing cell damage and optimizing energy consumption. The impeller with flat blades inclined at 45° proved to be the best option for cellulose extraction. The novelty of this research is that not only the flow fields and the agitation behavior were found, but also the stresses in the impellers were found, and the force, moment, and power required by the motor in each simulation were revealed at a different speed. The power curves shown help to understand how energy consumption varies under different conditions.